Menu
Search Search Basket
0
Cart
Stainless Steel Deep Curve Mould - Warm Glass
Stainless Steel Deep Curve Mould - Warm Glass
Stainless Steel Deep Curve Mould - Warm Glass
Stainless Steel Deep Curve Mould - Warm Glass

Stainless Steel Deep Curve Mould

SKU: Z-B044
Create beautifully shaped pieces with our curved moulds.
£18.75

£15.63 ex. VAT

2 reviews
3 in stock
More details

Product Details

Product Information

These deep curve moulds are perfect to slump your glass projects, adding shape and depth to your design. Ideal for home decor, gifts and beautiful display pieces.

The depth of these moulds ensures that your curved glass will be able to stand freely after firing.

Primer should always be applied to the mould before slumping, we recommend Boron Nitride Spray with Stainless Steel Moulds.

Please note: Make sure to remove any protective film or stickers from the moulds before use.

Troubleshooting:

Small kilns may require the process temperature reducing. In the Hobbyfuser reduce the top temperature from 649C to 626C. All kilns vary, as does glass viscosity. Testing is necessary.

Remove the shelf when slumping in small kilns.

Side firing kilns may require more time in the first ramp than top firing kilns.

Bubbles in slumping are caused by firing too high or holding too long at process temperature.

Cracked moulds or cracked glass is caused by firing too fast in the first ramp or cooling too fast.

Devitrification on the outside of a slumped piece is caused by firing too high or holding too long at process temperature.

We recommend using our Boron Nitride Spray with this mould for an easy release.

All our moulds are designed for multiple use and with care should last for many firings.

Dimensions

Small -  15.5cm x 12.5cm (7cm depth, 15.5cm diameter)

Medium - 21.5cm x 12.5cm (9.5cm depth, 21.5cm diameter)

Large - 27cm x 12.5cm (11.5cm depth, 27cm diameter)

Please note that all our moulds are hand-made and therefore the dimensions may vary slightly from those shown. Mould manufacturers allow a tolerance of up to 2cm. We strongly recommend cutting the glass to the size measured from the actual mould rather than relying solely on the dimensions shown.

Firing Schedule

This firing recommendation has been calculated using Bullseye Glass with a thickness of 6 mm in a Paragon GL24 kiln. 

Segment 1:

Rate (°C/hr) – 167

Temp (°C) – 649

Hold – 0:20

 Segment 2:

 Rate (°C/hr) – 999

Temp (°C) – 482

Hold – 1:00

 Segment 3:

 Rate (°C/hr) – 56

Temp (°C) – 371

Hold – :00

×