Product Details

Product Information

Create lamps or other art pieces with this semi-cylindrical mould. Try gluing two identically slumped glass pieces together and adding a base to create a deep vessel or vase.  

Bullseye Code: 8725

All our moulds are designed for multiple use and with care should last for many firings.

Dimensions

Size: 27cm x 23cm, depth 10cm.

Length of glass needed to fully fit the mould: approximately 30cm.

Please note that all our moulds are hand-made and therefore the dimensions may vary slightly from those shown. Mould manufacturers allow a tolerance of up to 2cm. We strongly recommend cutting the glass to the size measured from the actual mould rather than relying solely on the dimensions shown.

Firing Schedule

This firing recommendation has been calculated using Bullseye Glass with a thickness of 6mm in a Paragon GL24 kiln, and is courtesy of Bullseye Glass Co.

Segment 1:

Rate (°C/hr) – 167

Temp (°C) – 649

Hold – :20

 Segment 2:

 Rate (°C/hr) – 999

Temp (°C) – 482

Hold – 1:00

 Segment 3:

 Rate (°C/hr) – 56

Temp (°C) – 371

Hold – :00

×