£9.79 ex. VAT
5.0 / 5.0
2 reviewsPremium waterslide decals which can be used with ceramic, porcelain, fusing glass and enamel. Use these unique designs by Milestone to add stunning detail to your work.
Once applied, these decals need to be fired in a kiln to 730-800°C. Remember to make sure your kiln is well ventilated up to 535°C (1000°F).
Firing instructions are included with each purchase.
Size: 13.3 x 10cm
Each sheet contains 2 bouquets, each with 5 poppy stems. The largest poppy is 3.5 x 10cm and the smallest is 0.75 x 4.3cm.
Available in black and metallic gold,
The metallic decals are not suitable for the Firebox 8, Firebox 8x6 or Firebox 14 models without a vent hole (older models), as you would have to open the lid to vent the kiln and in these models this would disconnect the lid lock and stop the kiln from firing.
Bullseye Glass Co. also have a video on using these decals on their website, called Milestone Fusible Decals
I mix this with Bullseye Glastac as the medium, and it works well as a sheer watercolour effect, or layered up to opaque red. Even in an unvented kiln the red stays true to poppy colour. I'm aiming to buy more colours when they are back in stock.
This is my second pot, best red enamel I have used, I mix it with clove oil as I find it works well. no need to vent this unlike a lot of other red enamels.
I paint red poppies with this than once fired on full fuse, I put deep red frit on top and fire on a tack fuse.
