Heart Decal 13.3cm x 10cm

These premium waterslide decals can be used with ceramic, porcelain, fusing glass and enamel.

Once applied, these decals need to be fired in a kiln to 730-800°C.  

Remember to make sure your kiln is well ventilated up to 535°C (1000°F). 

Firing instructions are included with each purchase. 

We recommend using a
soft silicone rib tool to remove any air pockets when applying these decals.

Size: 13.3 x 10cm

Each sheet contains 16 hearts. Each heart is approximately 3.2cm across and 2.5cm tall.  

The metallic decals are not suitable for the Firebox 8, Firebox 8x6 or Firebox 14 models without a vent hole (older models), as you would have to open the lid to vent the kiln and in these models this would disconnect the lid lock and stop the kiln from firing.