Unicorns Decal 13.3cm x 10cm

Once applied, these decals need to be fired in a kiln to 730-800C.  Remember to make sure your kiln is well ventilated up to 535C (1000F). Firing instructions are included with each purchase.  We recommend using a soft silicone rib tool to remove any air pockets when applying these decals.

Size: 13.3 x 10cm 

Each sheet contains 16 creatures of various patterns. Each Unicorn is approximately 3.25cm.

The metallic decals are not suitable for the Firebox 8, Firebox 8x6 or Firebox 14 models without a vent hole (older models), as you would have to open the lid to vent the kiln and in these models this would disconnect the lid lock and stop the kiln from firing.