Product Details

Product Information

The unique extra small slumper dish is perfect paired with any sushi plate or dish. It is the ideal dish for your soy sauce, wasabi, or ginger side.

All our moulds are designed for multiple use and with care should last for many firings.


This dish measures 9cm x 9cm with a 12° angled slope on the edges, slumping about a 3.5cm deep.

Please note that all our moulds are hand-made and therefore the dimensions may vary slightly from those shown. Mould manufacturers allow a tolerance of up to 2cm. We strongly recommend cutting the glass to the size measured from the actual mould rather than relying solely on the dimensions shown.

Firing Schedule

We recommend the basic slump schedule when using 6mm Bullseye Glass in this mould, but increase the initial hold time to 20 minutes.

Segment 1:

Rate (°C/hr) – 167

Temp (°C) – 663

Hold – 0:10

 Segment 2:

 Rate (°C/hr) – 999

Temp (°C) – 482

Hold – 1:00

 Segment 3:

 Rate (°C/hr) – 56

Temp (°C) – 371

Hold – :00

Customer Reviews

Based on 1 review
Clearly class
Not yet got the programme right

I started by using the warm glass slumping schedule, the 6mm teckta barely slumped, I then tried the mould schedule and there was minor slumping. I added 2 minuets and 160C andthere was partial slumping.

I’ll try this again with 5mm which I think will have a better finnished appearance. Not sure which schedule I’ll try next.