Product Details

Product Information

0.5mm 'Fine Line' Stringers

Standard Pack : Contains approximately 60 stringers

Economy Pack : Contains approximately 275 stringers

Approximately 44cm long.

Stringers, threads of glass pulled from remelted Bullseye compatible sheet, can be used for lines or patterns in 2 or 3 dimensional kilnformed or torchworked projects. Bend with a candle or use straight from the tube.

Please note, these are extremely delicate so some stringers within the tube may be broken. Due to minute variations in thickness of the stringers and density of glass, the quantity in each pack can vary.

Working Notes

Contains:

Lead

Reactive Potential:

 May react with
Selenium, Sulphur Cold Characteristics Consistent colour.

Working Notes:

This glass can be unstable when subjected to extended heatwork (pattern bars, pot melts, boiled effect, kilncasting, etc.).

Firing above 1500°F (815°C) for more than 15 minutes or firing slowly between 1250°F (677°C) and 1500°F (815°C) may result in an
unstable glass. More susceptible to contaminants that seed devitrification than other glasses in the Bullseye line.

Cap with clear or plan to treat the surface (sandblast, coldwork, or apply clear powder and refire) after firing. No colour shift upon
firing. A dark interface reaction is possible with sulphur-bearing glasses (001137, 000137).  

Bullseye Opal Stringers are pre-struck and at target colour
form the manufacturing process, There may be slight
variation in colour.

Like our sheet glass, stringers are made by hand. There may be slight variation in colour, thickness, length, etc.

All our glass is COE90, Bullseye Glass compatible and suitable for applications such as glass fusing, glass casting and glass slumping (unless otherwise stated in the description).

×