Castalot Casting Plaster

Ideal for casting flat, textured or shallow open-faced casting with no under-cuts. Transparent and iridised glass surfaces will release cleanly from the plaster surface. If you are using Opal glass, it is preferable to spray the Castalot surface with Boron Nitride or coat thinly with bullseye shelf primer.

MIXING RATIO

Plaster/Powder: 2

Water: 1

Castalot will reproduce finely detailed textures – ensure that you agitate the mix rapidly after pouring into the mould or tap underneath to remove as many bubbles as possible (lumps in the mix are normal). 
With careful usage you should get at least 10 full fused pieces from one mould or at least 50 from slump firing. Repeat firings above full fuse temperature will lessen the life of the mould. Make a mould you love then use it over and over again, saving yourself both time and money on production.

We recommend that the plaster is stored in a sealed container in a cool dry place, and used within 12 months of purchase.