Bullseye Sheet Glass: 3mm Steel Jade Opal 0345.30

Contains:

Copper

May react with:

Selenium, Sulphur

Cold characteristics: 

Consistent colour

Working notes: 

At tack fusing and slumping temperatures, the surface frequently develops a metallic grey film, similar to effects with Steel Blue Opalescent (0146). This may disappear at full fusing temperatures. Cap with clear to insure a consistent opal green through the clear layer. To maintain the metallic effect, extend hold times at tack fusing or slumping temperatures. The metallic layer may develop anywhere where 0345 is exposed and can change over the course of multiple firings. It ranges from a thin glossy grey to a thicker, matte metallic.

A yellow residue on shelf releases such as primer and Thinfire may occur when firing to a full fuse or hotter. Scrape & apply fresh primer, or remove used Thinfire and replace with new to avoid possible contamination in subsequent firings.

The exposed surface of 0345 has greater sensitivity to items such as glass cleaner, marker and Glastac. Traces of these liquids, which often fire cleanly, may be visible in fired works, even when wiped away before firing. To minimize this effect, reduce the contact time between the glass and possible contaminants. Also, avoid using Glastac on the surface.

All our glass is COE90, Bullseye Glass compatible and suitable for applications such as glass fusing, glass casting and glass slumping (unless otherwise stated in the description).

Quick Tip: Reaction Action

Bullseye Glass SDS