Make a small dish with ease by slumping your fused glass work into this mould. Great for soap dishes, jewellery or trinket dishes and more. This handmade mould is designed for multiple uses, and will fit in all the kilns we sell.
This mould is a little larger and the edges are a little more defined than the softer edged Small Soap Dish Mould.
Dimensions:
Inner: 104mm x 154mm and roughly 160mm deep.
Outer: 105mm x 157mm and roughly 210mm deep.
Bullseye Code: 8981
Firing Schedule:
Please read: This firing recommendation has been calculated using Bullseye Glass with a thickness of 6 mm in a Paragon GL24 kiln, and is courtesy of Bullseye Glass Co.
Segment |
Rate (C/hr) |
Temp. |
Hold |
1 |
167C |
677C |
1:30 |
2 |
999 |
482C |
1:00 |
3 |
56C |
371C |
:00 |
Please note that all our moulds are hand-made and therefore the dimensions may vary slightly from those shown. Mould manufacturers allow a tolerance of up to 2cm. We strongly recommend cutting the glass to the size measured from the actual mould rather than relying solely on the dimensions shown.
All our moulds are designed for multiple use and with care should last for many firings.