Please Log In



Forgot your password?

Hop on board...

Are you a new Customer? Click here to register.

Register
Loading Zoom, please wait

Round Slumper Mould 8029 (29cm Diameter x 3cm)

Price £40.93 Inc VAT (£34.11 ex VAT)

 Go Back to All Moulds 

All prices include VAT.

Stock Status: 7 Units in Stock
Ref:
Z-G003
We Also Recommend for Round Slumper Mould 8029 (29cm Diameter x 3cm):
Product Information
Round Slumper Mould  

Makes a great salad bowl or fruit bowl.  A simple circular mould with a round base.

Diameter: 29cm; Depth 3cm.  Fits in the HotStart Pro kiln. Can be used with a 30cm pre-cut circle. 

Will this mould fit in my glass kiln?

 

Firing Schedule:

Please Read: This firing recommendation has been calculated using Bullseye Glass with a thickness of 6 mm in a Paragon GL24 kiln, and is courtesy of Bullseye Glass Co. 

Segment Rate (C/hr) Temp. Hold
1 167C 643C :05
2 999 482C 1:00
3 56C 371C :00

Troubleshooting

  • Small kilns may require the process temperature reducing. In the Hobbyfuser and HotStart Pro, reduce the top temperature from 643C to 620C. In the Firebox 14, reduce the top temperature from 643C to 600C. All kilns vary, as does glass viscosity. Testing is necessary.

  • Remove the shelf when slumping in small kilns.

  • Side firing kilns may require more time in the first ramp than top firing kilns.

  • Bubbles in slumping are caused by firing too high or holding too long at process temperature.

  • Cracked moulds or cracked glass is caused by firing too fast in the first ramp or cooling too fast.

  • Devitrification on the outside of a slumped piece is caused by firing too high or holding too long at process temperature.

Please note that all our moulds are hand-made and therefore the dimensions may vary slightly from those shown. Mould manufacturers allow a tolerance of up to 2cm. We strongly recommend cutting the glass to the size measured from the actual mould rather than relying solely on the dimensions shown.

All our moulds are designed for multiple use and with care should last for many firings.

Product Reviews

There are currently no reviews for this product. Be the first to Write a review

Registered office: 5 Havyat Park, Wrington, Bristol, BS40 5PA, UK
Company Reg No. 5365166. VAT No. 791350132
© Warm Glass UK, 2015-2018
Registered office: 5 Havyat Park, Wrington, Bristol, BS40 5PA, UK
Company Reg No. 5365166. VAT No. 791350132