Please Log In

Forgot your password?

Hop on board...

Are you a new Customer? Click here to register.

Loading Zoom, please wait
Ribbed Soap Dish Mould (14cm x 10cm)Ribbed Soap Dish Mould (14cm x 10cm)

Ribbed Soap Dish Mould (14cm x 10cm)

Price £22.71 Inc VAT (£18.93 ex VAT)

5 out of 5 stars (1 Customer Review)
 Go Back to Square Moulds 

All prices include VAT.

Stock Status: 1 Units in Stock
We Also Recommend for Ribbed Soap Dish Mould (14cm x 10cm):
Product Information
Ribbed Soap Dish Mould  

Make a stylish soap dish with ease by slumping your fused glass work into this lovely little textured mould. 

Mould measures approximately 14cm x 10cm and is roughly 2cm deep. 

Will this mould fit in my kiln?

Why not also try the smaller Soap Dish Mould?

Firing Schedule:

We recommend the following schedule when using 6mm Bullseye glass in this mould:

Segment Rate (C/hr) Temp. Hold
1 167C 700C 2:00
2 999 482C 1:00
3 56C 371C :00


  • Small kilns may require the process temperature reducing. All kilns vary, as does glass viscosity. Testing is necessary.

  • Remove the shelf when slumping in small kilns.

  • Side firing kilns may require more time in the first ramp than top firing kilns.

  • Bubbles in slumping are caused by firing too high or holding too long at process temperature.

  • Cracked moulds or cracked glass is caused by firing too fast in the first ramp or cooling too fast.

  • Devitrification on the outside of a slumped piece is caused by firing too high or holding too long at process temperature.

  • To prevent the glass pulling in at the edges when it slumps into the top of the mould, make sure your glass is slightly wider (no more than 5mm) than the edge of the mould. This will stop the glass pulling in at the sides.

Please note that all our moulds are hand-made and therefore the dimensions may vary slightly from those shown. Mould manufacturers allow a tolerance of up to 2cm. We strongly recommend cutting the glass to the size measured from the actual mould rather than relying solely on the dimensions shown.

All our moulds are designed for multiple use and with care should last for many firings.

Product Reviews
5 out of 5 stars
5 out of 5 stars Monday 31 July, 2017 By Emma Michelle Hughes
This soap dish is a far better size than the simple smaller type dish. It actually fits soap in nicely and the ribbed effect is a great detail to have.
This is my new favourite small mould to use at the moment. Definitely recommend this over the small dish.

Write a review

Registered office: 5 Havyat Park, Wrington, Bristol, BS40 5PA, UK
Company Reg No. 5365166. VAT No. 791350132