Kilncare Grand-fuser Glass Kiln - FREE MAINLAND UK DELIVERY
Kilncare Grand-fuser Glass Kiln - FREE MAINLAND UK DELIVERY Kilncare Grand Fuser Glass Kiln - FREE UK SHIPPING Kilncare Grand Fuser Glass Kiln Quartz Elements - FREE UK SHIPPING Kilncare Grand Fuser Glass Kiln Lid Vents - FREE UK SHIPPING
Kilncare Deluxe-fuser Glass Kiln - FREE MAINLAND UK DELIVERY

Kilncare Deluxe-fuser Glass Kiln - FREE MAINLAND UK DELIVERY

Kilncare Cub-fuser Deep Glass Kiln - FREE MAINLAND UK DELIVERY

Kilncare Cub-fuser Deep Glass Kiln - FREE MAINLAND UK DELIVERY

Kilncare Grand-fuser Glass Kiln - FREE MAINLAND UK DELIVERY

Looking for a large, robust, reliable, high performance kiln for your studio or school? The Kilncare Grand-fuser really delivers. The optional automatic vents offer faster turnaround of kiln loads and greater control. There is never any need to need to 'babysit' this kiln to vent it. It even comes with a WiFi enabled controller so you can monitor your firings remotely.

From £10,345.00 £8,620.83
SKU
XX-5460

If you find this kiln cheaper elsewhere - let us know and we will match it!

Kilncare Grand-fuser Glass Kiln with WiFi enabled Programmer - available with or without automatic vents.   Internal Dimensions: 130cm x 80cm x 32cm. (LxWxH)  

 Buy today to receive these fantastic benefits

platinum discountPlatinum Loyalty Discount Status - 20% off future orders
free glass coaster kitFree Glass Coaster Starter Kit (sent separately from the kiln)
technical supportUnlimited lifetime technical support
free UK deliveryFree delivery of your kiln to Mainland UK
glass kiln warranty4 year manufacturer's warranty - including elements

The largest kiln in the Kilncare Fuser range, this British built kiln is aimed at the serious and professional glass artist needing maximum internal space. The Grand-fuser is also ideal for schools due to the robust build, size and reliability. As with all Kilncare kilns, you can expect the solid build and high attention to detail in the design of this UK manufactured kiln that has made them such a success.

For further information about this kiln the team on 01934 756181.
 

Check out our page on Choosing a Glass Kiln.

Compare this kiln with others in our range.

Read our advice on Setting Up Your Glass Kiln.

FEATURES:


• WiFi enabled controller for remote monitoring of your firings
• 32 programs - each with up to 32 segments
• Each segment is a controlled heating/cooling ramp soak
• Soak times up to nearly 100 hours
• Ramp rates from 1 to 999°C/hour full
• Programs can be reviewed or altered while firing
• Program Pause & Segment Advance facilities
• Keyboard lockable
• Delayed start facility - up to 4 days
• Power failure recovery
• Energy used display
• Event / Damper / Fan relay output
• Alarm relay with alarm buzzer
• Mains power switch

Shelf Kit (Optional):

3 x Shelves, (780mm x 430mm x 19mm) and 8 x 25mm props. 

Kiln Shelf Information
Shape 3 x Rectangles
Length x Width (or Diameter) 43 x 78cm per shelf
Biggest Circle (Diameter) 43cm per shelf
Biggest Square 43 x 43cm per shelf
Number of 10cm Coasters 84
Diagram

 

Specifications:

This kiln requires the installation of a circuit breaker.  This should be fitted by a qualified electrician. We recommend you check the power supply to your kiln's location is suitable before purchasing.

  • Internal Size (WxDxH): 1300mm x 800mm x 320mm.
  • External Size (WxDxH): 1700mm* x 1170mm x 1300mm*
  • Maximum no. of 10cm coasters: 84, (28 per shelf in kit)
  • Power Rating: 12kw
  • Power Supply: single phase or 3-phase and neutral (240V/ 415V N). This kiln will all run on either single phase or three phase as standard and can be changed at any time simply by removing or adding a special link bar (that is provided with the kiln) to the mains connections. This should be done by a qualified electrician.
  • Kiln does not come with cable but this can be purchased from us at £10 per metre – on request.
  • Requires an estimated 63 amp breaker when connected to single phase or 20 amp per phase on 3 phase (your electrician can advise you)
  • Maximum Temperature: 960?C
  • Quartz tube "infra-red" heating system
  • Stainless steel chamber and base
  • Lid gas spring lift assist
  • Recessed floor
  • Heavy duty walkmesh under floor metalwork
  • Fast react thermocouple
  • Fast cooling
  • Weight: 270kg (307kg with kiln shelf kit)
  • Average Firing Cost: Approx. £3.50
  • Will fit through minimum door width of 90cm (with minor disassembly)
*external width increases to 1830mm when the KCR32 floor mounting bracket is used.

*height increases to 1330mm when the optional automatic vents are fitted

Other Details:

  • The Grand-fuser is on lockable castors.
  • The lid seal is not stuck on but is held in by a removable stainless steel picture frame and as such, in the event of damage, it is fully replaceable leaving a factory fitted finish that will give years more trouble free use.
  • Each Grand-fuser is fired to 800c with its own KCR32 programmer before dispatch to ensure perfect operation, calibration and removal of most of the binder vapours that are released by all kilns on the first firing.
  • Grand-fuser kilns carry a 4 year guarantee on all parts including elements.
  • Fully complies with all European and CE requirements.
  • Shelf kit is optional.
  • Kilns contribute towards our discount programme but do not qualify to receive discounts. 

Kiln Details:

Elements:

The kiln is equipped with high performance, hard-wearing infra-red quartz elements and well-designed insulation. It has a fast react thermocouple and is also fast cooling. The elements are located in the lid for even heating; this also makes them easy to replace if required.  The elements are switched off when the lid is opened by an automatic safety switch.

Lid:

The kiln lid has two vents. The vents are closed with Stainless Steel vent flaps which are lined with insulation pads with an anti-dust covered surface for clean operation. Vents are extremely helpful to release moisture (for example when drying a mould at the beginning of the cycle). Opening the vents after the end of the firing cycle (for example for the final 150C or so) can reduce the final cooling time before the kiln can be opened, aiding a quicker turnaround of kiln loads.

Automatic Vents Option: As an option, these roof vents can be motorised and are then programmed via the controller to open or close at any point through the firing cycle or at the end of a firing cycle when the last 150C or so need to be shifted before the kiln can be opened.  It could make the difference between coming in to a kiln that can be unloaded in the morning, or one that has still got 3 or 4 hours of cooling before it can be opened.  The vents can also be automatically opened at the start of a crash cool then closed before annealing begins.

Shown in the above picture is Kilncare's unique vented stainless steel room construction which vastly aids cooling of the kiln.

The lid stays open once lifted, leaving you with both hands free to load or unload the kiln.  There is a handle across the whole front of the kiln making it easy for either left or right hand lifting and a catch to hold the lid closed.

On the front of the lid are two large spy/vent hole with spring return, anti dust flap - great for keeping an eye on your firing.

The boards that make up the chamber are specially produced for Kilncare and are pre-fired to 1100c before inserted into the kiln to remove any shrinkage or warping that could otherwise happen.

Ultra Stable, Fast Cooling Floor Design

Under the floor is where the Grand-fuser excels. Under the brickwork, the floor structure is made from heavy duty walk mesh that expands with heat without distorting, offering superb physical strength. It also breathes so, as with the roof of the kiln, it aids cooling dramatically.

The bricks easily replaced if required as they are not cemented in.

Controller

Kilncare KCR32C Kiln Controller

The Grand-fuser comes with the KCR32CWIFI programmer which is a WiFi enabled multi-program controller targeted towards glass use with 32 programs each of up to 32 segments. Each segment is a controlled heating/cooling ramp followed by a soak. It is supplied pre-programmed with 9 typical glass programs (which can be over-written).

Delivery:

Delivery is to kerbside only and does not include installation. Please consider that you may need help to situate the kiln.   The kiln will be delivered boxed on a pallet measuring 145cm x145cm x 145cm and weighing approximately 300kg.

Delivery is free to Mainland UK. Additional charges may apply if there is restricted access to property.

When your kiln is ready for delivery, we’ll contact you to book in a date that is convenient for you. Deliveries are Monday - Friday and someone will need to be available at the premises to take delivery of the kiln. We are unable to specify a delivery time until the morning of the scheduled delivery.

Deliveries outside the UK: Delivery charges vary. While we subsidise delivery costs where we can, for some destinations we may have to request an extra delivery charge in addition to the one calculated at checkout. If this is the case we will contact you as soon as possible to agree this with you, and always before the kiln is dispatched. Other destinations may vary. 

Delivery is currently 6-8 weeks.

This kiln will fit through minimum door width of 90cm (with minor disassembly - see page 5 of the kiln manual).

Write Your Own Review
You're reviewing:Kilncare Grand-fuser Glass Kiln - FREE MAINLAND UK DELIVERY
Your Rating
Customer Questions
No Questions
Did you find what you were looking for?
We found other products you might like!