Kilncare Extra Deep Profuser Glass Kiln
A step up from the popular Hobbyfuser, this British built kiln has a large chamber and recessed floor to give extra depth to the kiln chamber. A must for the serious glass worker and perfect for schools due to the robust build and reliability. This is the latest offering from Kilncare, and you can expect the same solid build and high attention to detail in the design of this UK manufactured kiln that made the Hobbyfuser such a success. Free 3 year manufacturer's warranty.
Buy today and we will upgrade you to a Gold Discount customer, with 15% off future orders.
We provide full technical support and firing schedules for kilns sold by us.
The kiln is equipped with high performance, hard-wearing infra-red quartz elements and well-designed insulation. It has a fast react thermocouple and is also fast cooling. The elements are located in the lid for even heating; this also makes them easy to replace if required. The elements are switched off when the lid is opened by an automatic safety switch.
The lid is made from stainless steel: powder coated and oven baked. It is lined out with press cut, non-ceramic fibre. This eliminates the risk of brick dust particles dropping from the lid, making for a very clean firing environment. The lid construction enables the Profuser to retain the heat when needed but still release heat rapidly during the all-important cooldown period.
The lid stays open once lifted, leaving you with both hands free to load or unload the kiln. There are also two handles for left or right hand lifting and a catch to hold the lid closed.
In the centre of the lid is a large spy/vent hole with spring return, anti dust flap - great for keeping an eye on your firing.
The base section of the chamber is made from lightweight refractory brick and is recessed to provide extra height to the chamber.
The Kilncare Extra Deep Pro-Fuser comes fitted with the KCR16 controller, and upgrade from the previous KCR2. It has 10 fully adjustable programs, each with 16 segments. Each segment consists of 1 x rate of climb, 1 x target temperature and 1 x dwell/hold.
Pre-set with 10 useful glass programs for fusing and slumping. All these programs can be altered to suit your own needs.
Can display temperature in C or F.
Displays the kiln temperature, whether the kiln is heating or cooling, the present segment number and whether the kiln is running.
Start delay feature.
Segments can be skipped during firing if required.
Pause feature the enables the user to "freeze" the temperature at any given time during the process.
Shows how much electricity has been used during the present/last firing
Safety features such as broken thermocouple detection and various kiln fault alarms.
Extra Deep Version:
This is the Extra Deep version of the Kilncare Profuser, providing a recessed chamber to give another 105mm of internal height. Fantastic for drop-outs or larger castings. The length and width of the kiln remains the same as the orginal Profuser, but the internal height is increased to 330mm. The total external height increases to 635mm. The power rating remains the same.
The Pro-fuser stand has two shelves, one for the kiln to sit on and one for your own use. It raises the kiln by 650mm to a comfortable height. It is made of steel and is powder coated to match the kiln. The stand is supplied ready for assembly.
820mm x 480mm, with props.
Add castors to the stand to make your kiln easily moveable. A worthwhile extra!
This kiln requires the installation of a circuit breaker. This should be fitted by a qualified electrician. We recommend you check the power supply to your kiln's location is suitable before purchasing.
Internal Size (LxWxH): 850mm x 510mm x 330mm (Height is 225mm in the standard Profuser)
External Size (LxWxH): 1250mm x 810mm x 635mm (Height is 540mm in the standard Profuser).
Maximum no. of 10cm coasters: 32
Power Rating: 6kW
Power Supply: single phase or 3-phase and neutral (240V/ 415V N). This kiln will all run on either single phase or three phase as standard and can be changed at any time simply by removing or adding a special link bar (that is provided with the kiln) to the mains connections. This should be done by a qualified electrician.
requires a 30-32 amp breaker when connected to single phase
Maximum Temperature: 960˚C
Average Cost of Firing: £2.10
Will fit through minimum door width of 90cm (with minor disassembly)
The Pro-Fuser is built for a long life span and the 3 year guarantee covers all parts INCLUDING the elements.
Fully complies with all European and CE requirements.
shelf kit and stand are optional.
Kilns contribute towards our discount programme but do not qualify to receive discounts.
Delivery is to your door only and does not include installation. Please consider that you may need help to situate the kiln. The kiln will be delivered boxed on a pallet measuring 104cm x 168cm.
Ships free to any address in mainland UK. Other destinations may vary.
Delivery is usually within 3-4 weeks.
This kiln will fit through minimum door width of 90cm (with minor disassembly)
If you find this kiln cheaper elsewhere - let us know and we'll do our best to match it!
For further information about this kiln call Veronica on 01934 756181.
Check out our page on Choosing a Glass Kiln.
Compare this kiln with others in our range.