Please Log In

Forgot your password?

Hop on board...

Are you a new Customer? Click here to register.

Loading Zoom, please wait

Small Rod Pod Mould 8307 (18cm x 17.5cm x 2.5cm)

Price £33.33 Inc VAT (£27.78 Ex VAT)

 Go Back to Miscellaneous Moulds 

All prices include VAT.

Stock Status: 2 Units in Stock
We Also Recommend for Small Rod Pod Mould 8307 (18cm x 17.5cm x 2.5cm):
Product Information
Small Rod Pod Mould  

Use to create slim pattern bars made from stringers, frit or glass strips.  A great mould to have in your studio!

Inner Dimensions: Length: 18 cm, Width: 17.5 cm, Height: 0.7 cm 
Outer Dimensions: Length: 18.4 cm, Width: 18.4 cm, Height: 2.4 cm 
Opening Dimensions: Length: 18 cm, Width: 1 cm
Makes seven rods, each measuring approx. 17cm x 1cm x 0.5cm

Will this mould fit in my kiln?

Also available in a larger 25cm x 25cm size.

Firing Schedule:

Please Read: This firing recommendation has been calculated using Bullseye Glass with a thickness of 6 mm in a Paragon GL24 kiln. 

Segment Rate (C/hr) Temp. Hold
1 222C 677C :30
2 333C 804C :10
3 999 482C 1:00
4 83C 371C :00


  • Small kilns may require the process temperature reducing. In the Hobbyfuser and HotStart Pro, reduce the top temperature from 677C to 654C. In the Firebox 14, reduce the top temperature from 677C to 634C. All kilns vary, as does glass viscosity. Testing is necessary.

  • Remove the shelf when slumping in small kilns.

  • Side firing kilns may require more time in the first ramp than top firing kilns.

  • Bubbles in slumping are caused by firing too high or holding too long at process temperature.

  • Cracked moulds or cracked glass is caused by firing too fast in the first ramp or cooling too fast.

  • Devitrification on the outside of a slumped piece is caused by firing too high or holding too long at process temperature.

Please note that all our moulds are hand-made and therefore the dimensions may vary slightly from those shown. We strongly recommend cutting the glass to the size measured from the actual mould rather than relying solely on the dimensions shown.

All our moulds are designed for multiple use and with care should last for many firings.

Product Reviews

There are currently no reviews for this product. Be the first to Write a review