Offset Round Pendant Mould

Offset Round Pendant Mould 

Make beautiful, unique glass jewellery pieces without the hassle of drilling holes using this fantastic mould!

You can make 6 pendants in 3 different sizes with each firing. Designed to create lightweight pieces which are ideal sizes for pendants without the need for coldworking. Colour de Verre suggest filling with frit or using thin dichroic sheet glass to create designs like those in the images.

Mould size: 18 x 12 x 2.5 cm

Pendant Sizes: 42, 35, and 28 mm

Fill Weights: 14, 10, and 6 gms

?When filling the mould, pile the frit in a pyramid or dome shape so the centre of the mould is filled higher than the edges. This helps the correct flow of glass during firing, lowering the risk of the glass 'grabbing' the mould sides as it fires:

We strongly recommend using ZYP Boron Nitride Spray with our casting moulds for the very best results. Primo Primer can also be used. Standard shelf primer is not suitable.

Please note that all our moulds are hand-made and therefore the dimensions may vary slightly from those shown. Mould manufacturers allow a tolerance of up to 2cm. 

All our moulds are designed for multiple use and with care should last for many firings.