Nibble Tray Mould
China Soup Bowl 8343 (18.5 diameter x 5cm)

China Soup Bowl Mould 8343 (17.5cm diameter x 4.7cm)

Extra Small Square Slumper with Flat Base

Extra Small Square Slumper with Flat Base Mould (9 x 9 x 3.5cm)

Nibble Tray Mould (33cm x 11cm)

Rating:
100% of 100
£48.25 £40.21
More than 10 in stock
SKU
Z-G032
Nibble Tray Mould  

Create unique glass shapes with this 3 Section Jumper inspired by contemporary sushi dinnerware! Creates a great tray for nibbles or dips.

Measures: 13.625" x 5.375" x 2"

Will this mould fit in my glass kiln?

Why not also try the Three Section Server mould?

This is our Basic Slumping Schedule. It is a guideline and you should adjust it to suit your particular kiln, or for different thicknesses of glass. In particular you may need to increase the hold time for segment 1 to between 20-60 minutes for this mould:

Please note that all our moulds are hand-made and therefore the dimensions may vary slightly from those shown. Mould manufacturers allow a tolerance of up to 2cm. We strongly recommend cutting the glass to the size measured from the actual mould rather than relying solely on the dimensions shown.

All our moulds are designed for multiple use and with care should last for many firings.

Write Your Own Review
You're reviewing:Nibble Tray Mould (33cm x 11cm)
Your Rating
Customer Questions
No Questions
Did you find what you were looking for?
mouldcare (401.93 kB)
Using_Shelf_Primer (94.97 kB)
We found other products you might like!