Earring and Pendant Pod Mould
£37.00 £30.83
More than 10 in stock
SKU
P023
Make beautiful pendants and earrings of different shapes and styles easily using frit or scrap glass with this earring and pendant mould.
Outside Dimensions: 23cm x 14cm shapes range from 2cm to 8cm long.
We strongly recommend using ZYP Boron Nitride Spray with our casting moulds for the very best results. Primo Primer can also be used. Standard shelf primer is not suitable.
When filling the mould, pile the frit in a pyramid or dome shape so the centre of the mould is filled higher than the edges. This helps the correct flow of glass during firing, lowering the risk of the glass 'grabbing' the mould sides as it fires:
See the Small Pod Mould Guide pdf for more details. This schedule is a guideline and you should adjust it to suit your particular kiln, or for different thicknesses of glass:
| Phase | Rate (C/hr) | Temp. | Hold (mins) |
| 1 | 176C | 676C | 10 |
| 2 | 999 | 775C | 10-20 |
| 3 | 999 | 515C | 30-60 |
| 4 | 30 | 370C | - |
Please note that all our moulds are hand-made and therefore the dimensions may vary slightly from those shown. Mould manufacturers allow a tolerance of up to 2cm.
All our moulds are designed for multiple use and with care should last for many firings.
Write Your Own Review
Customer Questions
We found other products you might like!
